Category:Wire Harness Cable
KEL USLS20-30 Micro Coaxial Cable is a kind of harness which is assembled by KEL's USLS20-30|0.4mm pitch contact connector and adaptable Micro Coaxial Cable (AWG): #38 #40 #42 #44 #46 through a special production process. Our company (3A Electronics) specializes in the production of Micro Coaxial Cable - we produce and sell KEL (Nikkoru) USLS20-30|0.4mm pitch|#38-#46Micro Coaxial Cable. The picture below is a part of the physical picture of our Micro Coaxial Cable harness assembly products (the picture is for reference only).
------------------------------------------------------------------------------------------------
1、KEL USLS20-30|0.4mm pitch|36awg-46awg|Connector used for Micro Coaxial Cable Schematic diagram and specifications and features：
| The "USLS Series" is a pressure-solder connector for 0.4 mm pitch very fine coaxial cables (AWG#42); the "USL Series" is a stacking connection type. In cell phones, etc., the density of the base plate is increasing, and it becomes impossible to install connectors at the edge of the base plate. This product ensures an effective mating length mating length of 0.35 mm and achieves a low-profile stacking height of 1.65 mm. It has an anti-pry structure, which is a problem for stack mount types. Due to the stacked mounting, there is excellent machinability in the mating process. The range covers 20, 30 and 40 pole counts. A special feature of this product is that it is a lead-free product with solderless connections and bulk pressed solder type. By preparing the stacking type, it is possible to support a combination of right angle (USL) for one side of the chassis side connector and right angle (USLS) for one side of the chassis side connector. In addition, it is possible to connect the cable at the rear in the handset. |
| Features |
| The connector mounting height is 1.65 mm and the mating width is 3.05 mm. |
| Can cope with miniature coaxial cables (AWG #42). |
| Crimp connection, thus improving connection reliability and making the connector compact. |
| Employs metal shell noise countermeasures and product strength. |
| Ground terminal transmission characteristics / EMS characteristics are provided at multiple points. |
| Ensures an effective mating length of 0.35 mm |
| Base plate nickel barrier to prevent solder from floating |
| Turning on the cable after crimping allows passing the cable through a φ4mm thin tube. |
| Special extraction clamps are provided. |
------------------------------------------------------------------------------------------------
2、KELUSLS20-30|0.4mm pitch|36awg-46awg|Micro Coaxial Cable used in Micro Coaxial Cable Diagram and specifications：
